DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is not for use on critical and semi-critical medical device surfaces. Efficacy tests have demonstrated that this product is an effective bactericide, fungicide, and virucide in the presence of organic soil (5% blood serum).
General Cleaning: Apply this product to soiled area with a mop, cloth, sponge, hand pump trigger sprayer or low pressure coarse sprayer. This product can be diluted at 2 ounces per gallon or applied at full strength. Thoroughly wet soiled surface and scrub as necessary.
Disinfection & Deodorization: To disinfect inanimate, hard surfaces add 2 ounces of this product per gallon of water. Apply solution with a mop, cloth, sponge, hand pump trigger sprayer or low pressure coarse sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove excess liquid. For heavily soiled areas, a pre-cleaning step is required. Prepare a fresh solution for each use. To disinfect toilet bowls: flush toilet, add 2 ounces of this product directly to the bowl water. Swab the bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 10 minutes and flush.
Fungicide: At the 2 ounce per gallon dilution, this product is also fungicidal against the pathogenic fungi, Trichophyton mentagrophytes (Athlete’s Foot Fungus) (a cause of ringworm), when used as directed on hard surfaces found in bathrooms, shower stalls, locker rooms, exercise facilities or other clean, hard, non-porous, surfaces commonly contacted by bare feet.
Mildewstat: To control mold and mildew on pre-cleaned, hard, non-porous surfaces, add 2 ounces of Lucasol One Step per gallon of water. Apply solution with a cloth, mop, sponge, hand pump trigger sprayer or low pressure coarse sprayer making sure to wet all surfaces completely. Let air dry. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.
Bactericide: When diluted at the rate of 2 ounces per gallon of water, Lucasol™ One Step™ exhibits effective disinfectant activity against the organisms: Pseudomonas aeruginosa PRD 10, Escherichia coli, Klebsiella pneumoniae, Salmonella (schottmuelleri) enterica, Salmonella (choleraesuis) enterica, Streptococcus salivarius, Brevibacterium ammoniagenes, Streptococcus faecalis, Shigella dysenteriae, Enterobacter aerogenes, Staphylococcus aureus, Methicillin resistant Staphylococcus aureus (MRSA), Vancomycin intermediate resistant Staphylococcus aureus (VISA), Streptococcus pyogenes (Clinical–Flesh Eating Strain, BIRD M3), and Listeria monocytogenes, and meets all requirements for hospital use.
Virucide: This product, when used on environmental, inanimate, hard, non-porous surfaces at 2 ounces per gallon of water, exhibits effective virucidal activity against Influenza A2/Japan , Herpes Simplex Type 1, Adenovirus Type 2, Vaccinia virus, Human Immunodeficiency Virus Type I (HIV-1), Bovine Viral Diarrhea Virus (BVDV), Human Coronavirus (ATCC VR-740, Strain 229E), Hepatitis B Virus (HBV), Hepatitis C Virus (HCV) and Norovirus (Norwalk virus).
Kills HIV-1, HBV and HCV on pre-cleaned environmental surfaces/objects previously soiled with blood/body fluids in health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS), Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV).
Special Instructions for Cleaning & Decontamination Against HIV-1, HBV and HCV: On surfaces or objected soiled with blood or body fluids, prior to handling items soiled with blood or body fluids, use disposable latex gloves, gowns, masks, and eye coverings. Blood and other body fluids must be thoroughly cleaned from surfaces and objects before application of Lucasol™ One Step™. After application of Lucasol™ One Step™, allow surface to remain wet for 10 minutes. Blood and other body fluids must be autoclaved and disposed of according to local regulations for infectious waste disposal.
Sanitization: For use in restaurants, dairies, food processing plants and bars. When used as directed, this product is an effective sanitizer against Escherichia coli and Staphylococcus aureus. Remove all gross food particles and soil from areas, which are to be sanitized, with a good detergent, pre-flush, pre-soak or pre-scrape treatment. Rinse with a potable water rinse. To sanitize previously cleaned and rinsed, non-porous food contact surfaces, prepare a 200-400 ppm active quaternary solution by adding 2-4 ounces of this product to 3.5 gallons of water (or equivalent use dilution).
To sanitize immobile items such as tanks, chopping blocks, and counter tops, flood the area with a 200-400 ppm active quaternary solution or apply with a cloth, sponge, hand pump trigger sprayer or low pressure coarse sprayer making sure to wet all surfaces completely for a least 60 seconds. Let air dry. Prepare a fresh solution for each use.
To sanitize mobile items such as drinking glasses and eating utensils, immerse in a 200-400 ppm active quaternary solution for at least 60 seconds making sure to immerse completely. Remove and let air dry. Prepare a fresh solution daily or more frequently as soil is apparent. When used for sanitization of previously cleaned food equipment or food contact items, limit active quaternaries to 200-400 ppm. At this level, NO POTABLE WATER RINSE IS ALLOWED. This product is an effective sanitizer when diluted in water up to 250 ppm hardness (as CaCO3).
Salon/Barber Instruments and Tools Sanitizer Directions:
Pre-clean soiled instruments and tools. Completely immerse water safe non-porous instruments and tools in a use-solution of 0.56 ounce of this product per gallon of water (or equivalent use dilution) (200 ppm active quaternary) for at least 60 seconds. Rinse thoroughly and dry instrument before reuse. A fresh use-solution must be prepared daily or more often if the use-solution becomes cloudy.
Immerse pre-cleaned barber/salon tools (combs, brushes, razors, manicure/pedicure tools, clippers, scissors, trimmer blades) in a 2 ounce of this product per gallon of water use-solution (or equivalent dilution) (703 ppm active quaternary) for at least 10 minutes. Rinse instruments thoroughly and dry before reuse. A fresh use-solution must be prepared daily or more often if the use-solution becomes cloudy or soiled.
NOTE: Plastics may remain immersed until ready to use. Stainless steel shears and instruments must be removed after 10 minutes, rinsed, dried and kept in a clean non-contaminated receptacle. Prolonged immersion may cause damage to stainless steel or metal instruments.